A reliable, easy-to-maintain mechanical disc brake caliper that provides consistent stopping power for mountain and hybrid bikes without the complexity of hydraulic systems.

Best Use

• Budget MTB Upgrades: Ideal for riders moving from V-brakes to discs or replacing worn mechanical units.
• Touring & Commuting: Perfect for long-distance riders who prefer the field-repairability of cable-actuated brakes.
• Wet Weather Riding: A great entry-point for consistent braking performance in mud and rain compared to rim brakes.

What This Product Does

The BR-M375 uses a standard brake cable to pull a piston that presses the included resin pads against a disc rotor. Unlike hydraulic brakes, it relies on physical cable tension, allowing you to adjust the brake feel and pad engagement with simple hand tools rather than a bleed kit.

Compatibility Check

This caliper works IF:

• Your Levers: Are "Linear-Pull" (Long Pull) MTB-style levers (e.g., Shimano Deore, Alivio, or any standard V-brake lever).
• Your Frame/Fork: Has 74mm Post Mount tabs (or you have the correct IS-to-Post adapter).
• Your Pads: Uses Shimano B01S / B03S / B05S-RX Resin pads.

This caliper is NOT for:

• Road "Short Pull" brake levers (STI integrated shifters).
• Hydraulic brake lines; this is strictly cable-actuated.
• Sintered/Metal pads (designed for use with Resin pads only).

Pro Setup Layout

Designed for straightforward installation on either the front or rear of the bike. Mount the caliper to your 74mm post-mount tabs, ensuring it remains slightly loose until the cable is tensioned. Once the cable is secured to the actuator arm, squeeze the lever to center the caliper over the rotor, then tighten the mounting bolts. Use the integrated barrel adjuster to fine-tune the lever's "bite point" as the pads wear down over time.

Benefits

• Tool-Free Adjustability: Features an easy-to-access pad adjuster to compensate for wear without moving the caliper.
• Lower Maintenance: No brake fluid, no bleeding, and no specialized shops required for basic servicing.
• Clean Routing: Designed for standard 5mm brake housing, making it compatible with almost any frame.
• Included Resin Pads: Comes pre-installed with B01S pads for quiet operation and a smooth "bite" right out of the box.

Decision Shortcut

If you need a simple, "set-and-forget" disc brake that works with your existing mountain bike levers and won't leak or require bleeding, the BR-M375 is the industry standard for value and reliability.

Technical Reality Check

This is a Mechanical (Cable) Caliper. While it provides excellent stopping power, it requires more hand force at the lever than a hydraulic system. Additionally, Rotors and Adapters are NOT included; ensure you have a 160mm or 180mm rotor and the matching mount adapter for your specific fork or frame before starting the installation.

Technical Specs

Actuation	Mechanical Cable (Long Pull)
Mounting Type	74mm Post Mount
Pads Included	B01S Resin
Configuration	Front or Rear Universal